Cross-Market Green-up in football markets
This is a demonstration of how you can "cash out" (green up) a bet placed in one market with a bet placed in another market of the same football event. The video shows MarketFeeder Pro running triggers that place bets automatically. To download the triggers and run them in your MarketFeeder Pro, go to this article: [link] Like me in the video, you can run any betting strategies safely in test mode using Time Machine: [link] Want to stay on top of new features, useful tips, promotions, and trigger case studies? Subscribe to our WhatsApp chat: [link]
What's new in MarketFeeder Pro 22.214.171.124
A brief overview of the new UI features in the latest release of MarketFeeder Pro. Read more here: [link] Download MarketFeeder Pro here and get a free trial: [link]
How to work with graphs in MarketFeeder Pro
Graphs help you stay on top of where the prices are going and control other important information about the market. MarketFeeder Pro offers you a simple and intuitive Charts widget you can use to view the following selection parameters in dynamics: • Back price • Lay price • Pressure of Money • Last traded price • Traded volume (in currency units) • Volume % You can even view the selection’s BetFair graph, although we have an excellent dedicated service for this called BFCharts ( [link] ) Learn more about MarketFeeder Pro and how it can help you earn more by betting on BetFair: [link] #betfair #betfairgraphs #sportsbetting #marketfeeder #bettingbot #onlinebetting
BFStats - your analytical instrument for finding and proving betting ideas
BFStats is an analytical instrument for assessing betting strategies based on BetFair historical market data. [link] If you have never heard of BetFair, here is a link that will get you a free bonus for your first bet: [link] However, even if you are placing your bets elsewhere, BFStats will give you a huge competitive edge. It will instantly show you the profit/loss forecast for chosen strategies. BFStats gives you a library of analytical reports on how a particular betting strategy performs over time (flat stakes). Using interactive settings and widgets, you can fine-tune the strategy and choose the best configuration for maximised profit, such as: • Number of runners in a race • Race distance • First, second, third, etc. favourite • Price range • Minute of the match (for football strategies) • Number of goals • Which team scores first • Countries • Leagues The reports provide projected profit/loss figures for back and lay bets, with a 5% exchange commission in mind. We have hundreds of thousands of real historical market data to tap into, for a credible, robust statistical instrument that will guide you in the sea of uncertainty that online betting often is. Discounts for multiple reports, custom reports are also available. [link]
BACK and LAY Scalping with triggers
Triggers are smart enough to do automated scalping. Scalping is a betting technique in which you place back and lay bets at the edge of the currently traded price, to secure guaranteed profit regardless of the outcome. Traders normally do scalping manually, using the Ladder. While you can also do this manually in MarketFeeder Pro, I recommend using triggers. Triggers will place the opening bets, update them regularly to reflect the changing prices, and eventually execute a stop-loss just before the off if some of the bets are unmatched. In this video, we’ll watch triggers do scalping in real-time mode, with REAL bets on BetFair. You can download the triggers and try them on your own: [link] Try MarketFeeder Pro free for 2 weeks, to learn betting in a safe, risk-free environment when you use Test Mode: [link] #BetFair #scalping #onlinebetting #triggers #sportsbetting #tradeout #bettingbot
How to place Dutching bets and green them up with MarketFeeder Pro
Today we are looking at two hot #BetFair trading techniques at once (and none of them is about #triggers!) Have you ever tried first placing some #Dutching bets and then greening them up with profit? Easy-peasy if you have special instruments for that! You can turn on automated greening up in any market: it will track all “open” bets and automatically trade them out with the profit margin you’ll specify. At the same time, you can place Dutching bets on the chosen group of selections, with a ton of extra settings. Now, just combine the two techniques to perform the following within seconds: first place Dutching bets at prices that are better than the market ones. Then green up the bets, aiming to green up as many as possible, to achieve maximum profit. Curious how this is even possible? Watch the video until the end, as we will be BACKING in the first half and LAYING in the second one. Want to find out how profitable Dutching is? See how much you would win or lose if you bet in thousands of markets: [link] If you wonder what Dutching is, here is a useful article: [link] If you are new to BetFair, use this link to register and receive a bonus for your first bet: [link] #greenup #sportsbetting #sportsexchange #marketfeeder #bettingbot
How to spot a service break in Tennis using triggers?
How to register a situation when a player lost a game they were serving in? Watch this video to see how a trigger automatically trades out after a serving player loses a game. If you want to create a trigger yourself, use the following conditions: - Selection's Trigger Expression tennis_current_server is equal to 3 - sel_index - AND Selection's Trigger Expression tennis_player_games_won is equal to tennis_p_player_games_won - AND Any Other Selection's Trigger Expression other_tennis_player_games_won is greater than other_tennis_p_player_games_won With the first condition, you demand that the index of the serving player (trigger variable tennis_current_server) does not equal to the index of the player you are betting on (sel_index). With the second condition, you make sure that the number of games your player has won (trigger variable tennis_player_games_won) has not changed compared to the previous game (tennis_p_player_games_won) before one of the players won it. In other words, the condition is for your player NOT to win the previous game. Using the third condition, you request that the other player did win the previous game. The prefix other_ tells the program to check the selection variable for the other selection and not for the one the trigger is acting on. Download a ready-to-use trigger here: [link] Try MarketFeeder Pro free for 2 weeks: [link] If you are new to BetFair, use this link to register and receive a bonus for your first bet: [link] Want some tennis strategy analytics? Check out our statistical reports: [link]
How to place a delayed bet in MarketFeeder Pro
You often ask whether MarketFeeder supports delayed bets or pending orders. What is it all about? You leave an order for a bet that should be placed only when the price of your selection has “deteriorated” beyond the specified threshold. For example, right now the price is 5.0, and you want to place a delayed BACK bet at 4.0, or a delayed LAY bet at 8.0. But here’s a catch: the online exchange. i.e. #BetFair, does NOT have native support for delayed bets. It will always seek to match your bet at the best possible price. Therefore, your back bet at 4.0 it will immediately match at 5.0 without waiting or asking you about your intentions. Luckily, with #MarketFeeder Pro, you can place a delayed bet using a simple trigger. This video demonstrates how to place delayed back and lay bets on BetFair. You will see the trigger setup and how the triggers kick in at the right moments. Download the trigger file to play with it on your own: [link] Try MarketFeeder Pro free for 2 weeks: [link] If you are new to BetFair, use this link to register and receive a bonus for your first bet: [link] Interested in tips like this one? Join our WhatsApp group for daily updates: [link] #delayedbets #pendingorders #automatedbetting #bettingtriggers #onlinesportsbetting
Arranging market selections on the screen in MarketFeeder Pro
#BetFair arranges selections (horses, dogs, teams, etc.) on the screen according to their internal algorithm. With football, it is a fixed order of selections, such as The Draw always being the third in the Match Odds market. With #horseRaces and #GreyhoundRaces, it is usually the anticipated #favourite first, although this is not always true for Australian races. You can change this sorting order and arrange the selections the way you want it, using selection’s properties, such as: • Rank (lowest price has the first rank) • Volume • Stall number • Days since last run This short video explains how to do this in MarketFeeder Pro – a program for #automatedbetting on BetFair. Try it free for 2 weeks: [link] If you are new to BetFair, use this link to register and receive a bonus for your first bet: [link] Interested in tips like this one? Join our WhatsApp group for daily updates: [link]
Horse racing volume before and after the off
Here is an interesting snippet from BFCharts ( [link] ). If you look at #HorseRacing market graphs before and after the off, you will spot a remarkable difference between the intensity of #MatchedVolume growth just before the market starts, and its rather slow inflow after the market turns In-Play. You would think that exchange players would be more impulsive in their betting patterns at In-Play, yet the height of the volume bars hardly reaches up to half of what it is before the off. If you are new to #BetFair, sign up and get a bonus for your first bet: [link]
How to use trigger logs to debug your betting strategies - MarketFeeder Pro
The most common question we hear from customers is: Why is my trigger not placing bets? I tend to ask them to show me the trigger log. That usually leaves the customer clueless… Trigger logs are a powerful tool for testing and debugging your #betting #strategies. In this video, I am showing how to use logs to find out why triggers might not be placing bets in certain markets. I will be using a popular set of triggers for Laying on #Greyhounds with #lossrecovery: [link] I am looking into several trigger conditions that are preventing the trigger from placing bets. You will learn what you can do to unblock your triggers. Having watched this video till the end, you will likely be able to polish your #bettingstrategies on your own, using #MarketFeeder Pro. If anything is unclear, please post your questions in the comments. Here is a similar video tutorial explaining how to use program logs: [link] I am testing triggers in Time Machine: [link] If you are new to #BetFair, sign up and get a bonus for your first bet: [link]
Repeating betting actions with triggers
Repeating betting actions with triggers – a simple case with an example You can repeat the same trigger action over and over, and let me tell you how in this video. We will back the first horse in the list and keep placing new bets as soon as the previous ones are matched, each time increasing the bet size by 10%. You can see the result of such trigger in the video. Naturally, you can add more complexity to it, for example, only bet if the selection is the favourite, or bet if there is at least X amount in your account, but those are topics for some other video. I used MarketFeeder Pro to place these automated bets, and you can do this too if you check it out at: [link] You can try it for free today! If you are new to #BetFair, use this link to register: [link] l/betfair/ If you are new to #BetFair, sign up today and get a free bonus for your first bet: [link]
The Under 0.5 goals graphs
#betfair #bfcharts #soccer #football #betting The Under 0.5 goals graph in First Half Goals 0.5 is very predictable: it will always slope down exponentially. This means, the price of Under 0.5 will be falling rapidly at the beginning of the match, then slow down towards the 45th minute or by the time the first goal is scored. In other words, the first 10 – 15 minutes of a game show the best dynamic for Under 0.5 goals. The second selection, Over 0.5, demonstrates the opposite behaviour, growing exponentially and increasing in price at a higher pace toward the market closure. Draw your own conclusions… BetFair Graphs: [link]
Laying all horses at a price below 2.0
Elaborating on the topic of laying below 2.0. The trick will work very well with horses, only here it is easier to lay the entire field at a chosen price. The lower the price, the higher is your profit, however, the lower still is the probability that both horses will arrive at that price. This can only happen if some horse gets ahead of an obvious favourite closer to the end of the race. How can you quickly lay on all horses? The easiest way is to switch to the Engineer mode and place all bets with one button. Even if only one of them gets matched, your losses will be moderate due to the low price: with a bet at 1.2, it is only 20% of your initial bet size. If two or more are matched on the other hand, the result is in the video attached! :) Check more at [link]
Greyhound last traded price downtrend
A clear downtrend in the last traded price of the dog with the highest matched volume a few secs before the off. Video recorded from [link] - a BetFair price graphs aggregator.
Compensation bets in MarketFeeder Pro to help you with small LAY bets
The video shows how MarketFeeder Pro copes with the recent changes introduced to BetFair's API where you can no longer place LAY bets below the minimum. To prevent your bet from being rejected, MarketFeeder Pro can automatically send a bigger LAY bet and then immediately place a compensation BACK bet. Watch how this works for Dutching, trade-out and manual bets. We strongly recommend to stick to BetFair's Terms and Conditions! Learn more here: [link]
How to read the Program Logs in MarketFeeder Pro
Learn how to read and use the Program Logs in MarketFeeder Pro for a greater control over your bets, profits and performance. This short video tutorial takes you through all the features of the Program Logs. You can immediately try them yourself: perhaps, you have long wondered where you could find this information! Learn how to track withdrawn winners, score, winning selections, system errors, etc. MarketFeeder Pro is an automated betting program for BetFair: [link]
How to test loss recovery plans in MarketFeeder Pro
In this video, you will learn how to test staking plans and loss recovery plans much faster. You don't need to wait until a market is settled by BetFair; you can choose your own winner and check how your triggers will behave in response to the profit or loss from your bets. Follow me as I test the Universal Sequence Staking Plan ( [link] in a series of horse races that took place on October 17, 2018. Using Time Machine ( [link] I can test three variations of this plan in less than 10 minutes. All bets are placed automatically using triggers -- instructions in plain English that you can program using the Triggers Editor. Read more about triggers here: [link]
How to test Tennis betting strategies with Time Machine for MarketFeeder Pro
In this video, I'm showing how I test a betting strategy for BetFair. I lay on the two players expecting an equal profit from both. To do this, I use a trigger - a set of betting instructions in plain English. More info and ready-do-download triggers here: [link] But instead of waiting for over an hour for the tennis match to finish, I use Time Machine - a utility for backtesting based on historical market data. It takes me just around a minute to place my bets and see them matched, because I speed up the time and skip periods of time that are irrelevant to the strategy. Read more on how to get Time Machine and download markets: [link] Any comments and questions are welcome!
Why you need MarketFeeder Pro to bet on BetFair
This is a short introduction into the world of MarketFeeder Pro -- the automated betting bot for BetFair. You will learn the benefits of using this program and being part of our community. Join us today at [link] -- and you'll want to stay!
Market View Modes In Marketfeeder Pro
Learn about different ways to monitor market information that MarketFeeder Pro receives from BetFair. You will benefit from different market indicators and tools if you trade in horse races & Greyhound races, if you do scalping and green up, if you monitor POM and MA of the last traded price, etc. Learn more at [link]
Martingale loss recovery in Over/Under football markets
Watch how MarketFeeder Pro automatically bets against Over x.5 goals on BetFair and applies the simple Martingale loss recovery to win a set amount of money by the end of the match. The automated betting plan can be programmed using triggers - simple commands in plain English. You can find this trigger example (and many others) at our website: [link]
Using trade out buttons in Engineer Mode to green up or stop loss your bets
Learn how to quickly measure your potential profit and place a trade-out bet to immediately green up your open bets on BetFair. MarketFeeder Pro is a betting bot, more details here: [link]
Either Direction Greenup - a betting strategy for BetFair
This is a demonstration of the Either Direction Greenup automated betting strategy, with the full description and the downloadable trigger file here: [link] Visit marketfeeder.co.uk to find more about triggered betting on BetFair.
How to adjust settings when testing BetFair betting strategies using triggers
This tutorial video explains how to quickly adjust the necessary settings of your triggers when testing them for betting strategies. Learn how to view and modify constants that affect the flow of your triggers. Visit marketfeeder.co.uk to learn more about triggered betting on BetFair.
The Climbing Scalper - automated betting triggers
This is the demonstration of the Climbing Scalper triggers: [link] Get your free trial of MarketFeeder Pro and start making profit on BetFair automatically.
How to connect football markets in MarketFeeder Pro triggers
Learn how to use bets, prices and other parameters from one market in another market of the same match to maximize your profit and mitigate risks. Comment below to give us ideas for future video tutorials. Visit www.marketfeeder.co.uk to learn more about triggered betting on BetFair and to get your free trial!
How to load triggers into MarketFeeder Pro
In this Quick Start video, learn how to load trigger examples in a file into MarketFeeder Pro and run them in the program to place automated bets on BetFair. Visit marketfeeder.co.uk for more information.
How to import selections (horses, greyhounds, teams) from a text file
This video shows how to import selections (horses, greyhounds, teams) from a text file and bet on them using automated betting functions, such as triggers, in MarketFeeder Pro. Visit www.marketfeeder.co.uk for more information! Like this video if you want more videos like this one!
How to limit the number of your entries in several markets on BetFair
This video demonstrates how to use the triggers that limit the number of markets where they place bets simultaneously. The full trigger example can be seen and the triggers downloaded from the following page: [link] The video shows how to test triggers in Test Mode, without risking actual money.
Force-matching a test bet in MarketFeeder Pro
This short video shows you how to make an unmatched bet appear matched, so that you could quickly test some of your betting strategies that involve betting at the edge of back/lay prices. This feature is part of the Test Mode available in MarketFeeder Pro.
A horse racing betting day run in 20 minutes with TimeMachine plugin for MarketFeeder Pro
How to operate MarketLocator - the conditional search tool for BetFair!
Betting on BetFair: Collective Greenup
This video demonstrates how a betting bot such as MarketFeeder Pro can place bets on BetFair fully automatically, without the bettor's input. Even such complex betting strategies, like Collective Greenup, can be implemented in MarketFeeder Pro. The strategy featured in the video combines Dutching with greening up for an equal profit. The full description of the strategy and the triggers to download for free are available here: [link] Please ask your questions in the comments or email to email@example.com. Try MarketFeeder Pro free today! [link]
How to open triggers
There are quite many trigger examples on our web site, but still some people find it hard to use them. Watch this demo to learn simple steps that will help you give it a go.
Setting up a simple staking plan for lay bets
This tutorial will take you through all steps of programming a simple loss recovery for lay bets. The interface used is the Triggers Editor of MarketFeeder Pro, a bot for automated trading on BetFair. For more systems and triggered betting tips visit [link]
Connecting Win and Place markets in horse racing with MarketFeeder Pro
For BetFair users: if you place your bets in a win market based on an event or certain criteria in the corresponding place market, this video tutorial will teach you how to do it automatically.
HiPro86 with Time Machine
Getting Started with Time Machine
This video is a quick start guide for Time Machine - a tool for backtesting betting strategies on virtual and historical markets. The tool is an add-on to a program called MarketFeeder Pro - an auto-trading bot for BetFair Find out more at: [link]
Learn the power of triggers on MarketFeeder Pro - the leader of conditional betting software.
Betting on specific selections with MarketFeeder Pro
Learn how to bet (to lay in this case) on specific selections with MarketFeeder Pro.
How to inspect trigger logs in MarketFeeder Pro
Learn how to find out the reason why your triggers are not executed by inspecting log files with new Log Viewer feature of MarketFeeder Pro.
Editing triggers in MarketFeeder Pro
Learn how to create and execute a simple trigger that lays for a fixed liability on non-handicap races.
Market Locator in MarketFeeder Pro
Learn how to search for markets on BetFair with new feature of MarketFeeder Pro. Select country, sport and enter market parameters like volume, time to start, etc., get the list in a seconds and then add them all to My Markets list.
Different market views in MarketFeeder Pro
Watch how to tune market view in new version of MarketFeeder Pro.
Auto-Greenup with MarketFeeder Pro
See how MarketFeeder Pro can close any your position meaning green-up - reach equal profit on all selections on the market
Scalping with MarketFeeder Pro
The video explains how to do scalping (trading with small price gaps) using the Price Ladder.
New customers only, bet up to €/£20 on the Exchange and if your first bet loses, we’ll refund you €/£20 in Cash. Bet must be placed in first 7 days of account opening. T&Cs apply.
Gamble responsibly! Always be aware that betting is NOT risk-free. You must be 18+ years old before you try gambling, but even as an adult, withhold from spending money in an ill-judged manner. Our company does not encourage you to prefer gambling over other meaningful activities. If gambling is affecting your life or the lives of people close to you, please contact GamCare